Category: Kids birthday cakes

How to make a swimming pool cake

Evies Swimming Pool Birthday cake I love making cakes for Evie. Apart from the fact that she’s lovely, she is ALWAYS smiling. She always says “hello” when we walk into school (and I mean says hello to me- not just Darcey!) and she always chooses fab cakes that I’ve never made before. This year she was having a swimming pool party – obviously! So a swimming pool cake was definitely the right choice of cake.

I’ve made a few cakes for Evie before and if you remember then you probably know that she’s coeliac. That’s why I love making her birthday cakes. You don’t get cakes like this in the supermarket. I basically use my Madeira cake recipe as seen in this chart and swap the flour quantity for 50% gluten free flour and 50% rice flour. I find that mixing up the same quantity of flour needed in a recipe with a mixture of gluten free flour, rice flour or almond flour comes out light and tasty.

Designing the Swimming pool cake

I wanted to keep the design simple so I made the main part of the cake the swimming pool. I baked a rectangular cake and cut it into three layers then cut away the centre of the top layer. Raspberry jam and buttercream were added and the whole cake was covered in pale blue sugarpaste. I had to make it quite thick to be able to handle getting into the corners of the pool.
Evies Swimming Pool Birthday cake

I wrote ‘Evie’ in my fave script and left it to dry for a few days. I mixed it with some Tylo powder so it would really firm up (and quickly). A square cutter was used to make tiles which we placed around parts of the pool.

Rope was made with white sugarpaste strands which were twisted together and stuck on at the corners. Evies Swimming Pool Birthday cake

The splashes were made from a ball of sugarpaste which was brushed with gelatine to give it a glossy effect. The Evie was also brushed to give shine. Evies Swimming Pool Birthday cake

A life saving ring was made from white and red sugarpaste and left to harden.

To make the ‘water’ I made up some gelatine and let it cool before I spooned it into the pool. What I hadn’t banked on was that the tiles I had stuck in the bottom of the cake would bubble up and kind of soften and start to dissolve. Another thing I wasn’t expecting was how the gelatine would set. I thought it would just firm up like jelly. It didn’t. It wobbled a bit like jelly but when I had to drive the cake to the pool party it had moved and jiggled creating all these white lines. I was mortified but Evie’s mum said that the waves looked great. Pfew! Lucky save. Evies Swimming Pool Birthday cake

To finish off I added grey bars which I painted with edible silver paint and stuck them onto the side of the pool along with another life ring.

Having learnt my lesson making this mermaid cake I kept Evie in a little better proportion and just made the top half to place in the pool.

The bunting was literally a last minute idea made from decorative paper, string and two skewers.

Evies Swimming Pool Birthday cake

I kinda like this cake. I think the water worked but it’s all the splashes and the ‘Evie’ in a big dribble of water that makes it for me. What do you think?

EmmaMT x

How to make a Baymax birthday cake

How to make a Baymax birthday cake

How to make a Baymax Birthday cake

Last month I was asked to make Dulcie’s 5th Birthday cake and it wasn’t a Baymax birthday cake. In fact I feel a bit guilty that my first response when asked was ‘Oh no, not another Minecraft cake with hundreds and hundreds of little green squares!” Dulcie’s mum very graciously changed her mind to a Baymax cake and I was soooo pleased. Not only that it wasn’t a Minecraft one but because we loved Big Hero 6 and I knew Baymax was going to be a fun one to do.

The challenge was to make him a bit interesting and not just a big white figure on a cake board. Dulcie’s mum said “No pink”. It sounds like Dulcie is like Darcey – properly feminine and a complete tomboy at the same time. She also asked for the cake to be blue. “No problem” I said. And then I tried to make it!

The impossible blue Baymax birthday cake !

I set off on a google research mission. I’ve coloured my madeira cake before but never a specific blue colour and I know from the past that a yellowy, cream cake mix will not make a blue cake. It will be green! I even asked at the cake decorating shop how to do it. They weren’t sure so we looked for a ‘white’ cake to bake that could be coloured on line. The cake on the blog we found was as pure as snow. The author had removed egg yolks and replaced them with buttermilk. She used white butter- which we can’t get here (if you know of any please let me know) and it looked light and fluffy. I tried. It was not pretty! The cake was very light in colour but no where near white enough. I added the blue colouring and baked it. It came out illuminous turquoise. Not good. It also went completely solid after one day, even though it was double wrapped in cling film. Yuck!

For the next trial I baked my madeira cake, removing the egg yolks – replacing them with double cream, I used sunflower oil instead of the very yellow margarine and I used President butter – the whitest butter I know of. It still came out deep green but it was marvelously flat and very soft. In the end- running out of time,  I had to see if a green cake would be okay and when Dulcie’s mum said “Go for it” I made another batch of my madeira cake – again making it as light in colour as possible and only adding a touch of blue colour and the end result was lovely. Pfew!

How to make a Baymax Birthday Cake

This cake was relatively straight forward to make. As long as you have enough cakes to stack you’re good to go.  Cover the cake board a few days in advance so it has time to harden.

To shape the cakeHow to make a Baymax Birthday cake

I used a number of tins with paper liners in them as I didn’t have enough of the same size to get the height. The paper cases were for 7″ cakes. I made 3 x 7″, 1 x 6″, 1 x christmas pudding bowl – for the curved shoulders and one 4″ cake for the head. I used my 9″ Madeira cake mix and split the cake mix between the tins.

As the cakes were so uneven I flattened off the tops and stacked the cake to see how it would look. Once I was happy I added buttercream between each cake and smoothed the shape of the body. To make the cake secure and prevent the layers slipping off one another I pushed three wooden skewers into the body and snipped the ends off.

To make the headHow to make a Baymax Birthday cake

The head was a small 4″ cake. Use a sharp bread knife to shape it into a head shape then cover in buttercream and then cover with sugarpaste. I made the head first so it could harden up a little for when I needed to handle it into place later.

To cover the bodyHow to make a Baymax Birthday cake

Once cut to shape cover the body in a crumb coating of buttercream. Place it in the fridge to set for 10-15 minutes. I had to remove a shelf to fit him in. Then add a second coat of buttercream to get a smooth surface for the sugarpaste to sit on. I like to chill the second coat for another ten minutes but it’s not essential.

Roll out the sugarpaste quite thick – around the depth of two £1 coins. I covered the body in one go so as I lifted the sugarpaste off the work surface I knew it would stretch and likely tear if it wasn’t thick enough. As it’s positioned it does get thinner. To make sure there are no creases lift the sugarpaste at the bottom up and gently lift it away from the cake with one hand while smoothing it down with the other. This action will stretch the sugarpaste into shape and prevent creases. This does take some practice but just take it slow and don’t be afraid to pull the sugarpaste away furhter than feels right. Tuck the paste right into the base of the cake and remove any excess. I was able to lift the cake up and tuck the sugarpaste underneath then place Baymax onto the cake board (with royal icing to make him stay in place). I then rubbed down where my hand was to make him smooth again.

Use a drop of royal icing to position the head in place.

To add the arms and details
How to make a Baymax Birthday cake

The arms and legs were made from sugarpaste. Roll out sausage shapes then make them gently squared off at the ends. On the legs use a palette knife to make groves where the feet are and on the arms cut an additional oval for the elbows. Both the arms and legs were stuck into position with royal icing. The arms need to be held for a minute till they stick and won’t slide off. Once the arms were secured four fat sausage fingers and thumbs were added.

The badge on Baymax’s chest was made with a circle cutter. A palette knife was then used to make the detail lines in the centre.

For the face be really careful to position the eyes- cut out from black sugarpaste and a line of sugarpaste, exactly where you want them to be. Black sugarpaste is really sticky and once it’s on you won’t get the marks off. Luckily Baymax’s face is really simple. I used edible glue to position them so there was no chance of seepage.

Decorations for the Baymax birthday cake How to make a Baymax Birthday cake

I really love writing names in sugarpaste since I made Asher’s climbing wall cake . Again, I wrote the name out in a big black marker on paper and placed silicon paper over the top then traced the letters in a long thin line of rolled out sugarpaste. I then left the name to dry. Drying a name takes around 4-5 days but you can speed the process up by placing it in a warm (not hot or it will melt) oven. I put my oven on to 50ºC for five minutes then I turn it off and place the name inside for only 10 minutes. Remove it and leave it to cool completely. Repeat if you want the name firmer. The firmer the name the easier it is to handle and the less likely it is to break. Use Royal icing under and behind the name to stick it in place.

As the cake was going to be pretty bland with just Baymax I made little cubes of sugarpaste into wrapped gifts by adding ribbons and bows on top. They were placed around Baymax. I also didn’t just want to have a number 5 any where so I made a mini birthday cake complete with five candles for the number to sit on. I did this with thick sugarpaste cut out into circles in beige and then had smaller white discs (for cream) with red ‘jam’ over the top. These were layered up together with royal icing to hold them together.  If I was to change anything about this cake it would be to make the sponge layers of this mini cake more brown. Next time!  The candles were thin florists paste (as it dries harder quicker) with sugarpaste flames on top. I used red and orange sugarpaste which wasn’t completely blended together to make the flames more interesting.

How to make a Baymax Birthday cake

So, that was it. I really loved making this Baymax birthday cake. I think it works for boys or girls, you just change the colours to suit. What do you think?

All that’s left to say is

Happy Birthday Dulcie you gorgeous smiley munchkin you. xxx

EmmaMT

x

How to make an Xbox cake

How to make an Xbox cake

How to make an easy XBOX CAKE

This is an Xbox cake I made for Free Cakes For Kids. I always love getting asked to make cakes for the charity because it gives me such a warm and fuzzy feeling inside but this one was a bit of a concern. “Why?” I hear you ask. It’s just a black box. All kids love an XBox. It’s just a small cake. It shouldn’t be a problem for you oh cake obsessed Emma. Oh no, that wasn’t the problem. The problem was that we don’t have one and I know absolutely nothing about them and when you google Xbox a ton of images appear and having no experience whatsoever meant that I literally didn’t know where to start. The request was for an Xbox cake for a 10 year old boy who loved the FIFA football game.

Stumped!

Then Tim said “Just make the box with a controller. Don’t make it too difficult” after I was trying to work out how to get a FIFA game incorporated. And as always, he was right (just don’t tell him okay!) So that’s what I did and I have to say it was a really lovely cake to make. Pretty straight forward, simple design, black sugarpaste with grooves cut into it. And although I don’t like to make black cakes – especially for kids, the mum was overwhelmed by it when she saw it. I don’t know what she was expecting but she was so thrilled with it. I totally welled up when I saw her response (to be honest I’m welling up now just thinking about it) I’ve said it before and I’ll say it again. Giving something as simple as a cake to someone is the best feeling in the world. It says I care and I don’t even know you. I urge you to find your local group and give it a try.

How to make an XBox cake

XBOX CAKE

I baked a rectangular cake and as it was so small I didn’t cut it in half to fill it with buttercream. I did a test and it turns out that plain old Madeira cake is just as yummy with just butter cream and sugarpaste on the outside.

The cake was covered with a crumb coat and then a second outer coating of buttercream making sure that the edges were as smooth and flat as possible.

XBOX CAKE

The cake was then covered in black sugar paste. When using black paste it’s really important to make sure every surface is as clean as possible. Every little grain of icing sugar will look like massive spot on your cake. It’s difficult to do as the black sugarpaste is the stickiest of all the colours.

XBOX CAKE

Smooth the sugarpaste till it’s nice and flat and remove the excess, then use side scrapers to get nice ‘pointed’ corners. I’m still working on this technique. It doesn’t really matter if they aren’t super sharp but the sharper the better. The way to do this is to hold one scraper flat on the top of the cake so it’s overhanging the cake and smooth from the side with the other scraper. The scrapers should meet at the edge. This gives the sharp edge. I’m getting there….slowly. Practice, practice, practice!

XBOX CAKE

I then made a template to fit on my cake so I could mark where the grooves needed to go. You can download/print my template here. Enlarge or reduce it to fit your cake. XBOX CAKE

To make the marks I use a pin which has been sterilised in alcohol. Just pierce the paper into the sugarpaste.

XBOX CAKE

I did the marks slowly – one at a time rather than all in one go. I was worried the paper would move or it wouldn’t look right. I had more control this way.

I used a thin palette knife to create the groove lines.

XBOX CAKE

The lines weren’t as straight as I hoped but once they were all done I think I got away with it. Next time I’ll mark each line and create grooves between them.

XBOX CAKE

Then came the tricky part. I cut out the circle in the centre )that’s the hard bit- working out where the centre is!) I made sure I went right through the sugarpaste so that when I removed the cutter I could just stick the pallette knife in the centre and lever it out. It works every time!

XBOX CAKE 7

Use the same size circle cutter to cut out a green circle and place it in the hole using a little buttercream to ‘stick it down’. Try to roll out the green sugarpaste to the same thickness as the black so the top of the cake is flat.

I covered the cake board in the same green a week before and left it to harden so there wouldn’t be any finger prints in it. The cake was secured onto the board with a little royal icing.

XBOX CAKE

To make the controller I used the paper template and cut out a block of black sugarpaste then curved and shaped  it.

XBOX CAKE

I used tiny circle plunger cutters to make the buttons and controllers and made them stick by dampening the underneath of them with cooled boiled water. I used the same technique to add buttons to the front of the box. I also made big dents/holes in the front using a bulbous cone tool.

XBOX CAKE

To finish a black length of sugarpaste which had been rolled into a string was added to the box and controller and the writing was added.

In all a really fun cake to make.

I hope you enjoyed this tutorial. Bye for now

EmmaMT

How to make a Minecraft birthday cake

 

Minecraft Birthday cake

Have you heard of Minecraft? I hadn’t until recently. It’s a computer game that the boys in Beau’s class are really into. I went from being completely clueless to having two Minecraft cakes to make in as many weeks! I really didn’t know where to start with this cake. It needed to have loads of slices. When I make cakes for friends (especially Beau’s little friends) I like to create enough cake for the party guests AND  for the family to have some at home. Tim had the great idea of creating layers after I showed him screen grabs of  what the game looked like. Genius I thought.

How to make a Minecraft Birthday cake

Minecraft cake

 I started off by baking two Chocolate Madeira cakes (the large one was an 8″ and the small one was a 6″- I made double the recipe here and split it between the two tins)

Minecraft Birthday cake

The smaller cake was cut up so that I had two ‘L’ shaped cakes to create the steps. I think it’s probably a bit obvious where the two left over cake pieces went – yep straight onto my hips!

 

 

Minecraft Birthday cake

Check that the cakes sit nicely on top of each other. Too small and it will be hard to cover them, too big and the cake won’t be stepped enough.

Minecraft Birthday cake

Hopefully you will have covered your cake board with sugarpaste a week (or at least a few days) in advance.

Minecraft Birthday cake

Slice the large cake in two and fill with chocolate buttercream (the recipe for which is on this post). Cover the whole cake with a thin layer of buttercream then position the green rolled out sugarpaste over the cake. Smooth until as flat as is possible. Remove the excess sugarpaste and secure the cake on the cake board with a little royal icing.

Minecraft Birthday cake

Cover both the ‘L’ shaped pieces of cake by coating first in buttercream then sugarpaste. Don’t try and slice it in half to put buttercream in the centre. It’s very fiddly and messy and doesn’t work on such a small piece. The buttercream used to coat the cake and make the sugarpaste stick will moisten the cake enough.

Minecraft Birthday cake

Smooth the sugarpaste with a cake smoother and use a spoon to get into those awkward internal corners.

Minecraft Birthday cake

Position the larger of the ‘L’s onto the cake with Royal icing. Then repeat with the second ‘L’ shape.

Minecraft Birthday cake

To make the individual pixels squares – roll out the three shades of sugarpaste. If you do all three at the same time they will be relatively the same thickness.

Minecraft Birthday cake

Use a square cutter to press out lots and lots of squares all the same size. These are going to be the floor.

Minecraft Birthday cake

Secure each square pixel to the floor by dampening it with a paintbrush. Don’t use too much water as it will stain the cake. Dry off the excess water from the brush on the side of the pot first.

Minecraft Birthday cake

Add pixels on each level where there is a floor till you have done all three.

Minecraft Birthday cake

I tried to make the model of Mini Josh for the cake look like him and also look pixelated at the same time. I cut out cubes and rectangles in sugarpaste with the relevant cutters and used tooth picks in his legs and into his body to hold him secure. This also meant that once he had been made I could stand him up and push the tooth picks into a polystyrene fake cake and left him there leaning against box to dry for a while. (A couple of days- it’s a good idea to make the model when you cover the cake board) Minecraft Birthday cake

Use a little royal icing to secure the model to the cake. The toothpicks can only do so much.

Minecraft Birthday cake

Finally add your wording .

Minecraft Birthday cakeHey, Presto! One Minecraft cake!

enjoy! 

Amelia’s Brightly coloured birthday cake

bright birthday cake

This is a cake I made for Amelia who is in Darcey’s class. It was for her sleepover party and we (the mum’s of the party goers) were all informed that Amelia wanted everyone to wear bright colours, so it stands to reason that the cake was going to be nice and bright as well.

Amelia is a proper cutie. I actually thought she was going to be 6 as she is so weeny next to Darcey. Good job I checked! She has this super cute voice and wears her hair in bunches all the time and that’s where the idea for the little Amelia model came from. It was also the picture on her birthday invite which made things a little easier for me!

girls bright birthday cake

I wanted to keep things pretty simple for this cake and let the bold colours stand out, so, I made up loads of little square presents in sugarpaste then added ribbons in a contrasting colour. The bows on top were made using a silicoln mould. You can get them on Amazon. I just did a search for my one which is a Karen Davies Ballerina Ballet Mould and found a load of others that would be perfect. I really like the   Three piece JEM Bows Cutter Set . I think that would come in very handy!

named cake

To finish off the bottom I wrote Amelia’s name in thick sugarpaste and left it to dry for about 30 minutes. I like letters to still be quite malleable when I attach them to the cake so that they can bend with any curves. But they need to be firm enough to stand up. I use a little royal icing to hold them onto the cake.

edging a birthday cake

Rather than using ribbon along the base of the cake I made little balls of coloured sugarpaste.

To make sure each ball was the same size I rolled out the sugarpaste – using spacer bars, then used a circle cutter to cut out however many balls I needed in each colour. Because it’s a measured roll out I know that each ball uses the same amount of sugarpaste and therefore once rolled in my hands they’ll all be the same size. All that’s left is to attach each one to the cake board with a little royal icing.

EmmaMT

P.S. Sorry all you love birds. This is a Valentine free zone! But I still love you all. x

How to make a Mario and Yoshie Birthday Cake

Mario cake

When my friend Nicole asked me if I would make her son Oliver a Mario and Yoshi birthday cake I of course said “yes”. Then I quickly scoured Google images to find out exactly who Yoshi was!  I’ve had a few cake requests recently for computer games I’ve never heard of ( I know who Mario is) but Yoshi? Minecraft? If it’s not Rock stars or dressing up games (both proper girly ones) the chances are I won’t have heard of it.

Nicole told me what Oliver liked about the game and I got to work doing some drawings so she could choose which design was best. She liked the giant toadstool which I have to admit was my favorite of all the styles I had in mind too.

How to make the toadstool cake

I baked two round madeira cakes – a 7″ -for the base and a 10″ for the domed top.

For the dome

Mario birthday cake

This cake (the 10″) came out of the oven very domed but for this design that was just fine! I evened out the lumps and bumps with a bread knife to create as smooth a dome as possible, then cut it in half and filled it with raspberry jam and buttercream. Give the whole cake a thin crumb coating of buttercream. Pop it in the fridge for 10 minutes to firm up.

Mario and Yoshi cake

Once the crumb coating is firm add another slightly thicker buttercream coating and smooth it as much as possible. Place the cake on a thin 10″ cake board and secure in place with a small amount of royal icing.

Knead the red sugarpaste till it is nice and malleable. When ready place the cake on a tin which is smaller than the 10″ cake board so that the rolled out icing will hang over the edge.  That way you can cut off the excess and tuck the bottom bits of sugarpaste under and the cake board  won’t show at all.

To make the baseMario cake


Take the 7″ cake and cut it in half so you can add the buttercream and jam filling.  Level the top off so that is it VERY flat. Use a spirit level to check that it is otherwise you will either have a) a lopsided toadstool, b) it will fall over or c)your husband will walk in while you’re finishing off your iced cake and say “You know it’s not level, don’t you?” like Tim always does! Either way this is the time to make sure it’s really level. My cake was level – it’s just on a slanted plate! 

Give the cake a crumb coating and then a nice smooth buttercream coating before you cover it with white sugarpaste. Cut off the excess sugarpaste then get the sides as smooth as possible.

Position the base cake on your cake board, securing with some royal icing.

How to decorate the Toadstool cake mario birthday cake

To stack the dome on top of the base cake first insert some dowels. I use Plastic Cake Dowels  like these ones from Amazon. You only need around 3 to support the top cake. Before I added the dome I decorated the side of the cake so that I could do all the fiddly bits without it being in the way, like adding the blades of grass, eyes and flowers. Only then did I add a little royal icing to the top of the base cake and then positioned the dome on top.

I usually make the models when I cover the cake boards  – a week before the cake needs to be finished, but if I am completely honest I really avoided this one as I had no idea how I was going to make Mario actually look like Mario! but once I got started I was off and really enjoyed it. The little toadstools and stars were also fun to make.

The last job was to add the circles to the top of the toadstool which I did by dampening the white sugarpaste circles I had cut out.

Sugarpaste Mario and Yoshi

Yoshi, Mario and the mini toadstools were all secured in place with a little sugarpaste. Then the wording was iced and the ribbon was added to the cake board.

Mario birthday cakeThe cake was a big surprise for Oliver and I think he was chuffed to bits when Nicole presented it to him.

EmmaMT

Related Posts Plugin for WordPress, Blogger...
%d bloggers like this: