Category: modelling

How to make a swimming pool cake

Evies Swimming Pool Birthday cake I love making cakes for Evie. Apart from the fact that she’s lovely, she is ALWAYS smiling. She always says “hello” when we walk into school (and I mean says hello to me- not just Darcey!) and she always chooses fab cakes that I’ve never made before. This year she was having a swimming pool party – obviously! So a swimming pool cake was definitely the right choice of cake.

I’ve made a few cakes for Evie before and if you remember then you probably know that she’s coeliac. That’s why I love making her birthday cakes. You don’t get cakes like this in the supermarket. I basically use my Madeira cake recipe as seen in this chart and swap the flour quantity for 50% gluten free flour and 50% rice flour. I find that mixing up the same quantity of flour needed in a recipe with a mixture of gluten free flour, rice flour or almond flour comes out light and tasty.

Designing the Swimming pool cake

I wanted to keep the design simple so I made the main part of the cake the swimming pool. I baked a rectangular cake and cut it into three layers then cut away the centre of the top layer. Raspberry jam and buttercream were added and the whole cake was covered in pale blue sugarpaste. I had to make it quite thick to be able to handle getting into the corners of the pool.
Evies Swimming Pool Birthday cake

I wrote ‘Evie’ in my fave script and left it to dry for a few days. I mixed it with some Tylo powder so it would really firm up (and quickly). A square cutter was used to make tiles which we placed around parts of the pool.

Rope was made with white sugarpaste strands which were twisted together and stuck on at the corners. Evies Swimming Pool Birthday cake

The splashes were made from a ball of sugarpaste which was brushed with gelatine to give it a glossy effect. The Evie was also brushed to give shine. Evies Swimming Pool Birthday cake

A life saving ring was made from white and red sugarpaste and left to harden.

To make the ‘water’ I made up some gelatine and let it cool before I spooned it into the pool. What I hadn’t banked on was that the tiles I had stuck in the bottom of the cake would bubble up and kind of soften and start to dissolve. Another thing I wasn’t expecting was how the gelatine would set. I thought it would just firm up like jelly. It didn’t. It wobbled a bit like jelly but when I had to drive the cake to the pool party it had moved and jiggled creating all these white lines. I was mortified but Evie’s mum said that the waves looked great. Pfew! Lucky save. Evies Swimming Pool Birthday cake

To finish off I added grey bars which I painted with edible silver paint and stuck them onto the side of the pool along with another life ring.

Having learnt my lesson making this mermaid cake I kept Evie in a little better proportion and just made the top half to place in the pool.

The bunting was literally a last minute idea made from decorative paper, string and two skewers.

Evies Swimming Pool Birthday cake

I kinda like this cake. I think the water worked but it’s all the splashes and the ‘Evie’ in a big dribble of water that makes it for me. What do you think?

EmmaMT x

How to make a Baymax birthday cake

How to make a Baymax birthday cake

How to make a Baymax Birthday cake

Last month I was asked to make Dulcie’s 5th Birthday cake and it wasn’t a Baymax birthday cake. In fact I feel a bit guilty that my first response when asked was ‘Oh no, not another Minecraft cake with hundreds and hundreds of little green squares!” Dulcie’s mum very graciously changed her mind to a Baymax cake and I was soooo pleased. Not only that it wasn’t a Minecraft one but because we loved Big Hero 6 and I knew Baymax was going to be a fun one to do.

The challenge was to make him a bit interesting and not just a big white figure on a cake board. Dulcie’s mum said “No pink”. It sounds like Dulcie is like Darcey – properly feminine and a complete tomboy at the same time. She also asked for the cake to be blue. “No problem” I said. And then I tried to make it!

The impossible blue Baymax birthday cake !

I set off on a google research mission. I’ve coloured my madeira cake before but never a specific blue colour and I know from the past that a yellowy, cream cake mix will not make a blue cake. It will be green! I even asked at the cake decorating shop how to do it. They weren’t sure so we looked for a ‘white’ cake to bake that could be coloured on line. The cake on the blog we found was as pure as snow. The author had removed egg yolks and replaced them with buttermilk. She used white butter- which we can’t get here (if you know of any please let me know) and it looked light and fluffy. I tried. It was not pretty! The cake was very light in colour but no where near white enough. I added the blue colouring and baked it. It came out illuminous turquoise. Not good. It also went completely solid after one day, even though it was double wrapped in cling film. Yuck!

For the next trial I baked my madeira cake, removing the egg yolks – replacing them with double cream, I used sunflower oil instead of the very yellow margarine and I used President butter – the whitest butter I know of. It still came out deep green but it was marvelously flat and very soft. In the end- running out of time,  I had to see if a green cake would be okay and when Dulcie’s mum said “Go for it” I made another batch of my madeira cake – again making it as light in colour as possible and only adding a touch of blue colour and the end result was lovely. Pfew!

How to make a Baymax Birthday Cake

This cake was relatively straight forward to make. As long as you have enough cakes to stack you’re good to go.  Cover the cake board a few days in advance so it has time to harden.

To shape the cakeHow to make a Baymax Birthday cake

I used a number of tins with paper liners in them as I didn’t have enough of the same size to get the height. The paper cases were for 7″ cakes. I made 3 x 7″, 1 x 6″, 1 x christmas pudding bowl – for the curved shoulders and one 4″ cake for the head. I used my 9″ Madeira cake mix and split the cake mix between the tins.

As the cakes were so uneven I flattened off the tops and stacked the cake to see how it would look. Once I was happy I added buttercream between each cake and smoothed the shape of the body. To make the cake secure and prevent the layers slipping off one another I pushed three wooden skewers into the body and snipped the ends off.

To make the headHow to make a Baymax Birthday cake

The head was a small 4″ cake. Use a sharp bread knife to shape it into a head shape then cover in buttercream and then cover with sugarpaste. I made the head first so it could harden up a little for when I needed to handle it into place later.

To cover the bodyHow to make a Baymax Birthday cake

Once cut to shape cover the body in a crumb coating of buttercream. Place it in the fridge to set for 10-15 minutes. I had to remove a shelf to fit him in. Then add a second coat of buttercream to get a smooth surface for the sugarpaste to sit on. I like to chill the second coat for another ten minutes but it’s not essential.

Roll out the sugarpaste quite thick – around the depth of two £1 coins. I covered the body in one go so as I lifted the sugarpaste off the work surface I knew it would stretch and likely tear if it wasn’t thick enough. As it’s positioned it does get thinner. To make sure there are no creases lift the sugarpaste at the bottom up and gently lift it away from the cake with one hand while smoothing it down with the other. This action will stretch the sugarpaste into shape and prevent creases. This does take some practice but just take it slow and don’t be afraid to pull the sugarpaste away furhter than feels right. Tuck the paste right into the base of the cake and remove any excess. I was able to lift the cake up and tuck the sugarpaste underneath then place Baymax onto the cake board (with royal icing to make him stay in place). I then rubbed down where my hand was to make him smooth again.

Use a drop of royal icing to position the head in place.

To add the arms and details
How to make a Baymax Birthday cake

The arms and legs were made from sugarpaste. Roll out sausage shapes then make them gently squared off at the ends. On the legs use a palette knife to make groves where the feet are and on the arms cut an additional oval for the elbows. Both the arms and legs were stuck into position with royal icing. The arms need to be held for a minute till they stick and won’t slide off. Once the arms were secured four fat sausage fingers and thumbs were added.

The badge on Baymax’s chest was made with a circle cutter. A palette knife was then used to make the detail lines in the centre.

For the face be really careful to position the eyes- cut out from black sugarpaste and a line of sugarpaste, exactly where you want them to be. Black sugarpaste is really sticky and once it’s on you won’t get the marks off. Luckily Baymax’s face is really simple. I used edible glue to position them so there was no chance of seepage.

Decorations for the Baymax birthday cake How to make a Baymax Birthday cake

I really love writing names in sugarpaste since I made Asher’s climbing wall cake . Again, I wrote the name out in a big black marker on paper and placed silicon paper over the top then traced the letters in a long thin line of rolled out sugarpaste. I then left the name to dry. Drying a name takes around 4-5 days but you can speed the process up by placing it in a warm (not hot or it will melt) oven. I put my oven on to 50ºC for five minutes then I turn it off and place the name inside for only 10 minutes. Remove it and leave it to cool completely. Repeat if you want the name firmer. The firmer the name the easier it is to handle and the less likely it is to break. Use Royal icing under and behind the name to stick it in place.

As the cake was going to be pretty bland with just Baymax I made little cubes of sugarpaste into wrapped gifts by adding ribbons and bows on top. They were placed around Baymax. I also didn’t just want to have a number 5 any where so I made a mini birthday cake complete with five candles for the number to sit on. I did this with thick sugarpaste cut out into circles in beige and then had smaller white discs (for cream) with red ‘jam’ over the top. These were layered up together with royal icing to hold them together.  If I was to change anything about this cake it would be to make the sponge layers of this mini cake more brown. Next time!  The candles were thin florists paste (as it dries harder quicker) with sugarpaste flames on top. I used red and orange sugarpaste which wasn’t completely blended together to make the flames more interesting.

How to make a Baymax Birthday cake

So, that was it. I really loved making this Baymax birthday cake. I think it works for boys or girls, you just change the colours to suit. What do you think?

All that’s left to say is

Happy Birthday Dulcie you gorgeous smiley munchkin you. xxx

EmmaMT

x

How to make a Rock climbing birthday cake

How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/How to make a Rock climbing birthday cake

 

My little nephew Asher isn’t that little any more! He’s eight already. Last weekend he had a climbing party and before Christmas he told me exactly what he wanted his cake to be. Yes I know, you can see it’s a rock climbing cake!

The party was for 7 kids so I did go a little over board with the size of this cake. It could have fed 40! Well, I do only have one nephew! (on that side of the family anyway!)

How to design a rock climbing cake

How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

I started off with a drawing of the climber. I am often disappointed with the models I make – thinking that legs or arms look too long/short/wonky, so I decided to make a plan. You know the saying “Fail to plan and you plan to fail” I wanted to use the drawings as guides.

Making the loopy name

To make the name and climber firm enough to handle I made them a week before the party. The name was made by rolling out a long strip of white sugar paste with a little Tylo Powderkneaded in. Tylo powder has a firming action on the icing. It gets harder much quicker than when left to dry naturally over a few days – I wanted to be sure it wouldn’t break.

A piece of silicon paper was positioned over the hand written name then I bent and looped the sugarpaste strip cutting and gluing from behind using edible glue where necessary– mainly behind the ‘A’. I then placed it along marzipan spacers to make sure it was level and set it on a tray to dry out.How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

Making the climber

Having a guide for the climber made it so much easier. I will definitely make models this way again. The climber was also made with sugarpaste. First the Tshirt was made then the legs were attached. I made the sugarpaste damp and pressed each piece together but next time I will use edible glue. After a few days the arms hadn’t stuck so I had to use edible glue in the end anyway.

The arms were easy to make and I simply cut lines in the flattened ends to make fingers. Then a decorators tool was used to soften the edges and make fingernails. (the pic below is before the fingers were softened!) Once the arms and shoes were attached I made a hole in the neck using a cocktail stick. This is so that the head can be attached later. How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

To make the head

A piece of white sugarpaste was coloured with a dot of paprika coloured food gel and was rolled into a ball. A balling tool was used to make dents for the eyes and a tiny ball for the nose. White balls of sugarpaste were placed in the eye sockets and a small dent was made for the smile. A cocktail stick was cut in half and then pushed in to a piece of polystyrene so only 1cm stuck out and the head was then placed on top. In my experience if you try to push the stick into the  sugarpaste the head will either contort or the cocktail stick will poke out of the top, either way – we don’t want that. This way you have more control. Once the head is on the stick leave it to go hard enough to handle without squishing – 3-4 days.

After 3-4 days the head was then decorated with pale brown eye brows and tiny eyelashes and the eyes were painted black. A very pale pink was used to outline the mouth. A dry brush was used to dust a tiny amount of pink powder onto the cheeks to give them a glow. Finally the brown royal icing hair was piped on the top. A cocktail stick was used to make the hair a bit more curly. Again it was left to completly firm up. The head is the last thing to go on once the body is on the cake. How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

To stack the cake

This cake was always going to be bumpy in texture – yay for not having to make a cake look perfectly smooth!! –  and I wanted it to have a flat front. So as not to waste any cake mix I used round cake tin liners (like these cake tin liners) and scrunched up some tin foil to make up the space along one side of a 6, 7 and 8″ cake tin  while they were baking- yes I know – waaaayyyy too much cake! Once out of the tins there wasn’t much carving to do.

Each Madeira cake was cut in half and the middle was filled with seedless raspberry jam and buttercream and the same between each cake – that’s why it got so tall!  I didn’t want to put boards between the cakes – which you should do with a cake this big so I used skewers to keep the whole cake together. I was really nervous driving this cake to my sister’s house so if you are travelling with a cake this tall stack it properly with boards and dowels like this.  The front was trimmed so it was less bumpy and the whole cake was given a buttercream coating. 

How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

To cover the cake

The blue icing was rolled out so it could be lifted over the tall cake. This was no mean feat and if this was a wedding cake of this size I would have covered the sides then the top but as it is I went for one big covering. I did have a seam at the back but for this cake it wasn’t a problem. I made it as neat as I could.

I wanted the surface to be gently bumpy so I dug my fingertips all over the blue sugarpaste to give a more rock like appearance. I then added the rock climbing handles. These were made by rolling our different coloured sugarpaste into balls then flattening one side of the ball and adhering them all over the cake with edible glue. I loved the colours- perfect for an eight year old.

Screen Shot 2016-01-27 at 16.11.52

Adding the climber

To stick Asher the climber onto the cake I stuck coloured climbing handles under his hand while the handle sugarpaste was still soft. I pushed the dried hands into the soft sugarpaste so it looked like he was gripping them. Piping royal icing into the hole in the body before I stuck his head in place – this has been a winner for not having models loose their heads!  To stick the model onto the cake I used royal icing under the hands, body and behind the feet. Once I had positioned him and held him there for 30 seconds I placed a cocktail stick into the cake under the feet to stop him slipping down. Once I knew he was well and truly stuck I replaced the cocktail sticks with climbing handles.
How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

Finishing touches

The bottom of the cake looked a bit plain so I made different sized rocks to match the cake covering and placed them all around the bottom of the cake. I made bigger ones for the very left and right of the cake for the name to sit against. Royal icing was piped onto the back of the ‘Asher’ to stickit to the rocks.

I decided to make the ‘8’ to sit on the top at the last minute. To make sure it was hard I mixed the red sugarpaste with some Tylo powder, rolled it out and shaped the number then pushed a cocktail stick diagonally into it. I then placed it in the oven at 50ºC for 10 minutes. I removed it, let it cool completely then repeated. On the second cool it was firm. I left it over night to give it an extra chance to harden then stuck it in the cake the next morning with a little royal icing for good measure and had a few blue rocks around it for effect. This worked really well but the red colour did darken a little.

The last addiditons were the long strand of rope which was looped around the eight with a little curl at the bottom and the harness I added to the climber.

How to make a rock climbing birthday cake/ http://cakesbakesandcookies.com/how-to-make-a-ro…ng-birthday-cake/

I really loved this cake. It was a monster in size but the colours worked really well and I tried out a few new techniques that I will definitely do again like the way I did the name and using a plan to make the model.

When I delivered the cake before the party Asher came to see it and didn’t say a word – he just hugged me really tight for what seemed like ages. Ahhhhh, I love that. Big love from the little man. So all that’s left to say is

Happy Birthday ADF. I’ve gotta lotta love for you! 

EmmaMT x




How to make sugarpaste roses : My first ever cake demonstration

My first ever cake demonstration- for Create and Craft

Create & CraftLast Sunday I did something I’ve never done before. I stepped outside of my comfort zone and I did a cake decorating workshop at the Women’s Institute Centennial Fair in Harrogate for Create and Craft.

I’ve been  styling photo shoots for Prima’s craft pages for a few months now and they have teamed up with Create and Craft to produce a bumper Christmas craft magazine. (It’s out now) That’s how I got involved. Create and Craft asked Prima if someone from the team would like to do a demonstration. I offered up my services saying that I can do most crafts except knitting and crochet – and felting. I mentioned that I had this blog and they jumped at the cake decorating idea and showing how to make sugarpaste roses.

I’ve done workshops before but they’ve always been in my kitchen and for around six people. This was in a proper demonstration theatre with a stage and microphone (up my top!) and for the WI !!!

I made the cakes in advance then put them in cake boxes. I then put those boxes inside bigger boxes with bubble wrap all around them. Placed them in massive bags and stuck a massive travellers rucksack on my back – full of cake decorating equipment and had one cake bag in each hand and off I went to Kings Cross Station. You should have seen me. I was a very wide load- avoiding every knock and budge from other travellers which isn’t easy when you have to travel in a car, train, tube and then a three hour high speed train and a taxi at the other end to get to the hotel! I made it in one piece and didn’t dare unwrap the cakes till I got to the fair the next day. The cakes were all intact. I don’t know how!

I went on at 1.15pm. I don’t know how I did as it was all a blurr. I think I spoke too fast and I definitely rabbitted on and on while I made the repetitive petals for the roses but I had a pretty good audience and everyone seemed to be smiling at me at the end. The WI ladies I spoke to throughtout the day were so lovely. It was a really great atmosphere and I did spend a whole load of money!

The Create and Craft team were all really lovely and made me feel right at home from the very beginning- thanks you guys.

The demonstration was on how to make three types of roses. Here’s what I demonstrated.

Enjoy!

Rose buds
Create and Craft cake decorating workshop

These are some of the easiest roses you can make for a cake. They work well with sugarpaste but if you use florist’s paste they will be much easier to handle and will firm up much quicker. As with most decorations these roses work best in odd numbers. I think groups of three’s look best but five, seven and at a push even nine can look great grouped in a corner of a cake. As they are so small there is plenty of scope for designing a pattern with these tiny roses – be that an initial, a number for an age or a heart as I have done here. In the past I’ve also used these rolled roses to fill in gaps on wedding cakes when the cake is filled with bigger garden roses. Simplicity rules – especially with cake design.  Don’t you think?

To make rolled roses.

If you want all your roses to be the same size you can roll out your sugarpaste and use a small circle cutter to cut out the number of roses you need. When you roll these discs of sugarpaste into balls and then into roses they will all be the same size. I don’t mind them being slightly different. The choice is yours.

Create and Craft cake decorating workshop

  • Take your ball of sugarpaste and roll the ball into a sausage then flatten it.
  • Roll your flattened sausage from the smallest end. Don’t squeeze it too tight and if it doesn’t naturally stick at the end add a dab of edible glue. Try and make the last end narrower so it finishes nice and neatly.
  • Set aside to dry and repeat with the rest of the sugarpaste balls.
  • If your roses all look too different in height you can cut off some of the bottom once they are dry to even them up a bit.
  • To stick the roses onto the cake use a little royal icing. Hold the rose against the cake if adhering to the side for a few seconds. If too much royal icing squidges out at the sides clean it up straight away with a dry paint brush.Create and Craft cake decorating workshop
  • To make the leaves: colour some royal icing green and place it in a piping bag. Snip off a small ‘V’ at the bottom and start to pipe a tiny amount of green icing near the base of a rose and lift away and stop pressing the piping bag to create a triangular leaf shape. Add as many leaves as you think necessary. Leave to dry
  • If you are worried about adding the roses freehand you can score the sugarpaste in your design and then follow the line. You can also make a paper template as you can see I did with the heart,  which you can pin in place and remove at the last minute. It also helps you to know how many roses you’ll need.

Create and Craft cake decorating workshop

Brooch roses

Create and Craft cake decorating workshop

I’ve been making these brooches for cakes and cookies for ages. They’re a great way to add a touch of shimmer to a celebration. You can get pearls in all sorts of colours now so keeping to a colour theme for a party or wedding couldn’t be easier.  I used Wilton’s dark grey, pearl, pink pearl and silver but the world is literally your oyster!
Create and Craft cake decorating workshop

To make the booches

  • Roll out your florists paste (or sugarpaste) to around the thickness of a £1 coin. Brush a little edible glue over a small area. Add one colour pearl to the centre then add an alternative colour balls all around the centre. Press down lightly with your finger so the pearl balls sink in a little.
  • Use a circle cutter to cut out the shape. I made really small ones so I used the end of a piping nozzle to cut out my small brooches. I didn’t have small enough circle cutters as I wanted there to be little or no florists paste showing outside of the pearls. Set these aside to firm up – overnight is best.

Create and Craft cake decorating workshop

To make the roses

  • Roll out your florist’s paste so it’s reasonably thin then cut out large rose shapes. You can pretty much use any flower shape with this design as you are going to layer up so the more the merrier
  • Place the cut out rose shapes into an artist’s palette (reserved just for decorating)
  • Cut out more roses in smaller shapes and different colours. Use a dab of edible glue to stick each rose to the one underneath it. Keep adding till you have enough roses. Create and Craft cake decorating workshop
  • Use edible glue to stick the brooches into the centre. Leave to dry overnight before removing. It’s a good idea to lightly dust the pallette before adding the roses so they don’t get stuck. Also if you have time, remove the roses from the pallette and upturn them onto a piece of florists foam so the underneath can dry fully before you stick them on the cake.
  • To stick the brooch roses onto the cake use a little royal icing and hold them in place for a few seconds if adhering them to the sides of the cake.
  • Position your ribbon on the cake before you stick the roses on as you can overlap the ribbon with the roses (still sticking in place with royal icing).

Create and Craft cake decorating workshop Create and Craft cake decorating workshop

I love making these rosettes ever since I got my hands on these Wilton cutters from Create and Craft. They have two sides – circles and crinkly circles. The crinkles are really small and make pretty designs so these rosettes look super cute.

If truth be told I wanted to make these for the roses for my workshop at the Create and Craft theatre but Tim (my husband) took one look at them and said “I thought you were making roses?” to which I replied “They’re modern roses!” He gave me one of those looks that says “Really Emma?” and so I set about making the brooch roses instead. But never being one to waste an idea I stuck the rosettes on the back of the cake so I could still share the design. Which do you prefer?

To make Rosettes

  • Roll out two or three colours of sugarpaste. I chose three pinks which were close in colour. Try and keep them to similar thicknesses.
  • Cut out an outer crinkly circle then keep cutting smaller ones.
  • Once you have lots of different sizes in different colours mix and match them so they are all flat and neat.
  • Cut out a centre circle and place a brooch the same size as the hole made from pearl balls in the space.
  • Cut out a crinkly circle which is just bigger than the mixed design. Brush it lightly with edible glue. Carefully lift the design with the brooch onto the larger circle and press lightly with the ball of your hand to adhere the two pieces together. Leave to dry.
  • If you want the design to stick to a round cake only leave the design to dry for 20 minutes before adhering it in place on the cake with royal icing. That way you can gently encourage the rosette to bend with the curve of the cake.

Create and Craft cake decorating workshop Create and Craft cake decorating workshop

 

Garden rose cupcakes

These are one of the most requested roses when it comes to wedding cakes and they are also the most time consuming. If you are planning to make them for a wedding cake start them straight away. As soon as you get the request. Not only do they take an age to make but they will be so much easier to handle once they are completely dry. Even once they are dry they are really frail so always handle them with care.

I love to put these on cupcakes. They make them look really glamourous. Almost too good to eat!

Create and Craft cake decorating workshop

 

How to make Garden roses

The trick with these roses is to make them a little crinkly. Real roses are never completely smooth so a curve or two will only make them look more real like.

  • Always use Florist’s paste when making these roses. You can roll it out really thin without it tearing – which sugarpaste will definitely do. Florist’s paste will dry out really quickly so always keep any paste not being used wrapped up and in a sealed sandwich bag.
  • Edible glue is used throughout this rose to stick petals on.
  • Make small buds from florists paste and leave to harden for a few hours.
  • Roll out the florists paste so that it’s paper thin and you can almost see the design of your roll out mat through it.Create and Craft cake decorating workshop
  • Cut out one large petal. Stick it to the rose bud so that it covers the entire thing and overlaps at the top. Keep the petal to a point and tuck inone edge of the petal. Leave to dry.
  • Roll out some florists paste and cut out three small petals. Take each petal in turn and any not being used should be stored in a plastic sleeve (the kind you use for paper) so that they don’t dry out.Create and Craft cake decorating workshop
  • Place the petal on the firm foam and use a cell pin (rolling pin with a curved end) to thin it out more. Work in a circluar action thinning out the centre and then concentrating on the edges so they are the thinnest part of the petal. They will start to frill when they are thin enough.Create and Craft cake decorating workshop
  • These first three petals are going to be positioned tight against the bud. Start by adding the first petal. The centre of the petal should line up against the join line of the very first petal on the bud. Stick the petal on firmly and gently pull back the very top of the petal so you can just see the bud. Repeat with the next two petals – again positioning the centre of each on the join of the last petal added.
  • The next layer has five medium petals. Cut out these thin petals and thin them out with the cell pin on the foam as previously done.

  • Create and Craft cake decorating workshop To give the petal shape pinch the bottom of each petal.
  • Take the very top edge of the petal and fold it over a cocktail stick. Slide the cocktail stick out so the fold in the petal stays in place. Be very careful not to break it off. Repeat on both sides near the top. Place the petal to one side to dry for twenty minutes. You can dry petals quicker on a piece of foam.
  • Continue to thin and fold the other petals.Create and Craft cake decorating workshop
  • Once all the petals have been made and are dryer they will hold their shape. Stick them onto the rose bud. Apply glue in a ‘v’ shape at the bottom of the each petal and stick down the right hand side of the first petal. Before you stick the left hand side down position the next petal- overlapping the last. Each petal overlaps the next. The folds you created with the cocktail stick force the petals into place and make the overall rose bigger. Leave to dry over night. The rose will be difficult to handle at this stage if it’s not left to dry. Create and Craft cake decorating workshop
  •  Once dry cut out seven large petals and thin them in the same way. Then pinch at the bottom and fold over the edges with a cocktail stick as with the last layer.
  • Add these rose petals in the same way – overlapping as you go. This is the last layer so let them open the rose up.
  • Once each petal has been stuck on the final layer leave the rose upturned on a piece of foam to dry thoroughly overnight.
  • To stick the finished garden rose on a cupcake turn it over and with a very sharp knife remove the stem at the bottom of the bloom. Keep in mind if you want to travel with these cupcakes they will need to fit in the box with the lid closed so they need to be quite shallow.
  • Pipe a buttercream swirl on each cupcake then position the rose on top. Leave to set for 30 minutes before travelling with them.

Create and Craft cake decorating workshop Create and Craft cake decorating workshop

 

Wow! That was a long post! I hope you enjoyed it as much as I enjoyed the demonstration. All that’s left to say is thank you to Create and Craft and Prima Magazine for such an exciting opportunity.

EmmaMT x

How to make a quick Ice cream splat cake

How to make a quick Ice cream splat cakeGenoise birthday cake

It’s that time of year again. That time when your daughter who has a summer holiday birthday get’s three birthday celebrations and three cakes! One on the actual day, one with family and one with her friends! I’m shattered just thinking about it now! This has to be the last year we do it like this!

This year I decided to keep it simple whilst trying out a new recipe for the friends party. I’ve heard genoise cake mentioned loads on The Great British Bake off (along with creme pat!) and thought this was the perfect opportunity to see what all the fuss was about.

Oh my goodness!

This has to be the lightest, fluffiest, most delicious cake I have ever made. It does take a bit of faffing – what with the heating up of the eggs and all that whisking but it is WELL worth the effort. The cake is so soft it literally crumbles in your hand when you pick it up so be warned – handle with care!

I teamed it with a chocolate ganache buttercream which I made with soya cream leftover from the family party. I have to say that soya cream is doubly creamy! Give it a go. You won’t regret it.

The ice cream splat

Decorating this cake literally took 10 minutes and if I made this kind of design again I would probably make a Madeira cake so I could cover the whole cake with sugar paste and make the dribbling ice cream a bit prettier from sugarpaste too. This cake would never have taken the weight of a sugar paste coating. It would have gone completely splat – more than the ice cream did!

The kids literally went “Wow’ when they saw it and that’s what it’s all about for me. The smiles on their faces – especially Darcey’s who helped me at each step of the way – mini photographer/baker/blogger in the making that one.

Print this recipe 

Chocolate Genoise cake

  • 60g butter
  • 8 medium eggs
  • 200g Caster Sugar
  • 140g Plain Flour
  • 60g cocoa powder

Chocolate ganache buttercream

  • (this quantity is enough to fill and cover the cake in ganache)
  • 150g unsalted butter- at room temperature
  • 150g icing sugar
  • 50g cream (double or single depending on how thick you want it)
  • 50-100g dark chocolate- broken into small pieces

To bake the cake

  1. Grease and line four 8” cake tins with silicon paper (I use sunflower oil to grease my tins as the edges of the cake stay soft and less crumbly). Preheat your oven to 170ºC (Fan oven150ºC)
  2. Sieve the flour and cocoa powder into a bowl and combine completely. Set yo one side.
  3. Place the butter in a saucepan and heat until it has melted. Keep stirring it until it becomes a deep brown colour. This adds to the flavour of the butter. Set aside to cool.
  4. Set a heatproof bowl over a saucepan of simmering water and add the egg and sugar. Whisk by hand until the mix warms up. You don’t want to cook the mixture – just warm it.
  5. Remove the bowl from the heat. You now need to whisk the egg and sugar mixture till it doubles or triples in size. By warming the eggs you are encouraging the air in them to expand. This will take around five minutes so it’s a good idea to use a stand mixer and let it do it’s stuff.
  6. Once it doesn’t look like it can expand anymore drizzle the melted butter into the bowl while the whisk is still going.
  7. Sieve the flour and cocoa onto the mixture – don’t be tempted to just tip all the dry ingredients in over the egg mix as it will be heavy and will burst all the air bubbles you’ve just created. Without the air bubbles the cake will be heavy. The air bubbles in the egg are the cake’s raising agent. Slowly and carefully fold the flour and cocoa powder into the mix till just combined. It’s important not to over mix.
  8. Spoon the cake mix evenly into the cake tins and smooth with the back of a spoon. I made one cake tin a smaller amount than the others as it was going to be made into a giant cake pop.
  9. Bake for 20-25 minutes or until the sides come away from the tin. The cake will instantly bounce back when pressed lightly in the centre with a finger.
  10. This cake is very delicate so leave it to cool completely in the tin before turning out.

To make the chocolate ganache buttercream

  1. Place the butter and icing sugar in a bowl and mix until light and fluffy.
  2. Place the cream in a saucepan and heat until just starting to bubble then remove from the heat.
  3. Immediately place the chocolate pieces into the cream and stir until completely melted. Set aside to cool.
  4. Once the chocolate has cooled add it to the buttercream and whisk.
  5. Try not to eat it on a spoon from the bowl!

Darcey's Ice cream splat birthday cake

How to make the Ice cream cake

  1. Layer up three layers of cake with chocolate ganache.
  2. Take the small layer of cake and crumble it into a bowl . Add a small dollop of ganache and mix it up until it forms a ball. Roll it up in your hands and pop it in the fridge for 10 minutes to harden.
  3. Make up some royal icing in your choice of colour and put it in a piping bag. Use a little royal icing to position the cake pop on the top centralarea of the cake.
  4. Pipe the icing over the top of the cake pop and let it dribble down over the cake.

Darcey birthday cake

5. Don’t go too mad as the icing will keep dripping once you stop. I let it just reach the sides of the cake.

6. Place a trimmed wooden skewer into the cake pop at an angle. Push it in far enough that the ice cream cone will sit at an angle and won’t slip down.

7. Place the cone over the stick and press into the cake pop. Leave to set.

Happy 9th Birthday Darcey Doodles. We love you so

Mamma x

Darcey's Ice cream splat birthday cake

The Black Forrest Gateau decorated cake

Best Black forrest gateaux Do you ever have one of those days when you just get a brainwave? A stroke of cake genius that you just can’t stop thinking about till you’ve baked it / tried it / tasted it? Well that’s what happened last month with the big birthdays in my family.

Tim was born on his mum’s birthday and this year it was a double whammy of BIG birthdays. Let’s just say that they are both staying 21 forever!

Tim’s mum invited us to go out for lunch to celebrate at The Bottlehouse which is an amazing pub with the most fantastic food. I made the cake – of course! Now I know I have mentioned that Tim’s favorite cake is black forrest gateau before but my dilemma was that Tim’s mum had requested a Whisky cake!  I decided to kind of mix them both up and make a very boozy Black forrest gateau in the same kind of way that I made the Whisky cake. That basically meant adding a ton of alcohol. That was my brainwave.

I used the recipe from this post and added more kirsch and cherry brandy at every chance I could. I thought this would put my girls off. Nope! I do believe I am going to have problems with Darcey when she’s a teenager! She loves the alcoholic cakes and she’s only 7!

The challengeRenshaw

It was about this time that I decided to enter the Renshaw birthday cake challenge. Perfect timing you might say. I don’t enter into competitions or challenges very often but when the challenge is something you’ve planned to do anyway you just think “Let’s go for it!”. T that and “fingers crossed!”.

I selected my Renshaw colours. Have you seen their website? I hadn’t before the challenge. I just bought my sugarpastes from the local cake decorating shop, but they do tons more colours and products than I was aware of. Thirty six colour to be precise.  Jade green or tropical coral anyone?

For this cake I used:

  • Duck egg blue for the cake board. I wanted something that would look good for boys and girls and duck egg blue looks so good with brown.
  • Chocolate brown This tastes really good. It’s probably the best tasting ready roll out there.
  • White for the cream topping
  • Poppy Red for the cherries, but I could have chosen Ruby red.

 

How to make the decorated Black Forrest Gateau cake

The cake recipe

  • 225g butter, at room temperature
  • 225g caster sugar
  • 160g  self-raising flour
  • 65g cocoa powder
  • ½ tsp baking powder
  • 4 medium eggs
  • 1 tbsp kirsch
  1. Preheat the oven to 180°C (160°C fan). Grease 2 x 8 inch round tins and line the base with baking paper. You can use two tins and cut the cake in half through the middle, or if you have enough tins bake four separate ones.
  2. Blend the butter and sugar together.
  3. Add in the flour, cocoa powder, baking powder and eggs and blend until smooth.
  4. Add the kirsch
  5. Divide the mix into the cake tins and smooth it flat.
  6. Bake for 20–25 minutes until the cakes start to come away from the sides.
  7. Leave them to cool for 5 minutes before turning them out onto a wire rack to cool completely. Make sure you remove the baking paper so the cake doesn’t ‘sweat’.

The filling recipe

  • 340g jar of morello cherry jam (any cherry jam will work)
  • 3 tbsp kirsch
  1. Place the jam in a saucepan on a low heat with the Kirsch until it melts. Set aside to cool then place between each cake layer.

The chocolate cherry ganache recipe

  • 50g butter
  • 100g dark chocolate
  • 1 tbsp cherry brandy
  • 100g icing sugar
  • 1 tbsp milk to soften if neccesary
  1. Place the chocolate and butter in a saucepan over a low heat until they are completely melted. Stir continuously. Add the Cherry brandy then set aside to cool for a few minutes. 
  2. Sieve the icing sugar into a bowl then add the chocolate mix. Whisk until combined then add a little milk at a time. The ganache should look glossy. 
  3. Leave to cool for a few minutes before covering your cake completely with a crumb coat and then a thicker coat. Chill the cake in the fridge in between each layer of buttercream. 

The Black forrest Gateaux cake

Cover the cake in chocolate sugarpaste, smooth and remove the excess.

The cherries

To make the cherries: roll out some red sugarpaste between two spacers. This will give an even thickness so when you cut out circles with a cutter and then roll them into balls each cherry will be exactly the same size.

I wanted the cherries to be a darker shade on one side making them look more realistic. So I got my air brush gun out. This was it’s first outing and I have to say it was really, really easy to use and I pretty much got the desired effect straight away. It was good fun too. I’d been avoiding using it for ages as I didn’t know how it worked.  Now it’s all I want to do.

The Black forrest Gateaux cake

I sprayed the sides of each cherry with a mixture of red and a drop of black food dye until they looked darker and glossier. I then left them overnight to harden up and dry up. 

A few days earlier I made the cherry stems and stuck them in the dips in the cherries before the cherries dried.  Make the stems by rolling out some green and brown sugarpaste. Squidge them together and roll until the stem is the desired length. Add a tiny bit of brown at the tip and leave to dry.

Create swirls of cream with rolled out white sugarpaste. Don’t make the ‘cream’ too tall or it won’t look quite right. I used royal icing to ‘glue’ the cherries in place.

The Black forrest Gateaux cake

To make the cream topping I rolled out the white sugarpaste into a rough circle then used a circle cutter to create some dribbles. Smooth the edge of the cream with your fingers then place over the chocolate sugarpaste. If the cream needs securing brush the underside with a little water.

Add the cherries and swirls of cream and you’re done.

The Black forrest Gateaux cake

This cake turned out really well. It was really moist and rich – which Tim loved and I think his mum liked it too! Darcey definitely did! black forrest gateau

Happy Birthday gorgeous bloke. x

 

EmmaMT

x

Related Posts Plugin for WordPress, Blogger...
%d bloggers like this: